Revision 273

[flosoft]

Hey again. 273 is out

So here's my checklist:

#1: My Spellchecker still doesn't work
#2: Selecting Multiple contacts in the Adressbook doesn't work.

That is all that I found which isn't working.

[flosoft]

#3: Autosaving if no Adress is filled in gives the error message: Could not be sent.
#4: Autosaving re-adds the signature.

[simoesp]

Spell Cheker working fine with me (Using Firefox)

[flosoft]

#5: If you reclick on a folder, the messages dissappear. If you have several pages of mails, your mails can't be displayed (empty list).

[kfordham281]

#5: If you reclick on a folder, the messages dissappear. If you have several pages of mails, your mails can't be displayed (empty list).

I also experienced this in Rev 271

[igeoffi]

spellcheck fine.....
ill confirm the other bugs later...

[yllar]

#1 not confirmed
#3 confirmed

[flosoft]

hmm ... might my Spellchecker not work as I use an SSL connection to my RC?

[Reload]

Hey again. 273 is out

So here's my checklist:

#1: My Spellchecker still doesn't work
#2: Selecting Multiple contacts in the Adressbook doesn't work.

That is all that I found which isn't working.

#1: No problem
#2: Confirmed

Problem with saving to Draft:
Error log:
[06-Jul-2006 22:53:48 +0200] IMAP Error: Could not save message in Drafts in /home/webcrew/public_html/webmail/program/steps/mail/sendmail.inc on line 0

[darkcoder]

Hey again. 273 is out

So here's my checklist:

#1: My Spellchecker still doesn't work
#2: Selecting Multiple contacts in the Adressbook doesn't work.

That is all that I found which isn't working.

I had problems with my spellchecker until I turned the firewall off on the server.

[darkcoder]

I fixed my firewall problem by opening traffic from the server to the Internet with port 443.

Probably you are having problems after this commit
http://trac.roundcube.net/trac.cgi/changeset/265

[vgranieri]

Spell check not working even with firewall turned off

[flosoft]

I fixed my firewall problem by opening traffic from the server to the Internet with port 443.

Probably you are having problems after this commit
http://trac.roundcube.net/trac.cgi/changeset/265

Nope. That isn't any problem normally.

[darkcoder]

I fixed my firewall problem by opening traffic from the server to the Internet with port 443.

Probably you are having problems after this commit
http://trac.roundcube.net/trac.cgi/changeset/265

Nope. That isn't any problem normally.

Unless you have an installation like mine where each server has its own firewall enabled and only the ports used for incoming/outgoing traffic enable, everything else just drop it. In that case, need to open outside traffic in port 443.

Do you keep patching a previous copy of roundcube, or test a clean svn downloaded copy?

Try changing the google link to the way it was before Build 265, port 80 instead of 443, and give it a try.

[flosoft]

Clean version.