Roundcube Community Forum
SVN Releases => Issues & Bugs => Resolved => Topic started by: flosoft on July 06, 2006, 10:31:32 AM
-
Hey again. 273 is out :)
So here's my checklist:
#1: My Spellchecker still doesn't work
#2: Selecting Multiple contacts in the Adressbook doesn't work.
That is all that I found which isn't working.
-
#3: Autosaving if no Adress is filled in gives the error message: Could not be sent.
#4: Autosaving re-adds the signature.
-
Spell Cheker working fine with me :-\ (Using Firefox)
-
#5: If you reclick on a folder, the messages dissappear. If you have several pages of mails, your mails can't be displayed (empty list).
-
#5: If you reclick on a folder, the messages dissappear. If you have several pages of mails, your mails can't be displayed (empty list).
I also experienced this in Rev 271
-
spellcheck fine.....
ill confirm the other bugs later...
-
#1 not confirmed
#3 confirmed
-
hmm ... might my Spellchecker not work as I use an SSL connection to my RC?
-
Hey again. 273 is out :)
So here's my checklist:
#1: My Spellchecker still doesn't work
#2: Selecting Multiple contacts in the Adressbook doesn't work.
That is all that I found which isn't working.
#1: No problem
#2: Confirmed
Problem with saving to Draft:
Error log:
[06-Jul-2006 22:53:48 +0200] IMAP Error: Could not save message in Drafts in /home/webcrew/public_html/webmail/program/steps/mail/sendmail.inc on line 0
-
Hey again. 273 is out :)
So here's my checklist:
#1: My Spellchecker still doesn't work
#2: Selecting Multiple contacts in the Adressbook doesn't work.
That is all that I found which isn't working.
I had problems with my spellchecker until I turned the firewall off on the server.
-
I fixed my firewall problem by opening traffic from the server to the Internet with port 443.
Probably you are having problems after this commit
http://trac.roundcube.net/trac.cgi/changeset/265 (http://trac.roundcube.net/trac.cgi/changeset/265)
-
Spell check not working even with firewall turned off
-
I fixed my firewall problem by opening traffic from the server to the Internet with port 443.
Probably you are having problems after this commit
http://trac.roundcube.net/trac.cgi/changeset/265 (http://trac.roundcube.net/trac.cgi/changeset/265)
Nope. That isn't any problem normally.
-
I fixed my firewall problem by opening traffic from the server to the Internet with port 443.
Probably you are having problems after this commit
http://trac.roundcube.net/trac.cgi/changeset/265 (http://trac.roundcube.net/trac.cgi/changeset/265)
Nope. That isn't any problem normally.
Unless you have an installation like mine where each server has its own firewall enabled and only the ports used for incoming/outgoing traffic enable, everything else just drop it. In that case, need to open outside traffic in port 443.
Do you keep patching a previous copy of roundcube, or test a clean svn downloaded copy?
Try changing the google link to the way it was before Build 265, port 80 instead of 443, and give it a try.
-
Clean version.