I searched the forum for a solution to my problem, but haven't been able to find one. I installed RC on RedHat 5, with Apache 2.2, using Dovecot IMAP server. Used installer script to generate config file contents (pasted below). Did NOT install the mcrypt or fileinfo PHP extensions as the installer said these were optional. Once setup I noticed the following problems...
1. Login hangs/times out if user has email in INBOX, if there is no mail in INBOX user logs in fine.
2. Drafts can be saved, but when I attempt to view Drafts folder RC hangs (displays loading animation for several minutes, disappears without showing Drafts folder's contents)
3. When sending mail, RC saves the mail to the Sentmail folder, and sends the mail, but when I attempt to view the Sentmail folder the behavior is the same as the Drafts folder described above.
There is nothing added to logs/console, logs/errors, or the webserver error log.
Our previously used webmail client works fine. Command line mail clients such as Pine work fine as well.
I have included my mail.inc.php below, any help resolving these problems would be greatly appreciated!
$rcmail_config = array();
// system error reporting: 1 = log; 2 = report (not implemented yet), 4 = show, 8 = trace $rcmail_config['debug_level'] = 8;
// enable caching of messages and mailbox data in the local database.
// this is recommended if the IMAP server does not run on the same machine $rcmail_config['enable_caching'] = false;
// lifetime of message cache
// possible units: s, m, h, d, w
$rcmail_config['message_cache_lifetime'] = '10d';
// automatically create a new RoundCube user when log-in the first time.
// a new user will be created once the IMAP login succeeds.
// set to false if only registered users can use this service $rcmail_config['auto_create_user'] = TRUE;
// the mail host chosen to perform the log-in // leave blank to show a textbox at login, give a list of hosts // to display a pulldown menu or set one host as string.
// To use SSL connection, enter ssl://hostname:993 $rcmail_config['default_host'] = 'imap.host';
// TCP port used for IMAP connections
$rcmail_config['default_port'] = 143;
// Automatically add this domain to user names for login // Only for IMAP servers that require full e-mail addresses for login // Specify an array with 'host' => 'domain' values to support multiple hosts $rcmail_config['username_domain'] = '';
// This domain will be used to form e-mail addresses of new users // Specify an array with 'host' => 'domain' values to support multiple hosts $rcmail_config['mail_domain'] = '';
// Path to a virtuser table file to resolve user names and e-mail addresses $rcmail_config['virtuser_file'] = '';
// Query to resolve user names and e-mail addresses from the database // %u will be replaced with the current username for login.
// The query should select the user's e-mail address as first col $rcmail_config['virtuser_query'] = '';
// use this host for sending mails.
// to use SSL connection, set ssl://smtp.host.com // if left blank, the PHP mail() function is used $rcmail_config['smtp_server'] = 'smtp.host';
// SMTP port (default is 25; 465 for SSL) $rcmail_config['smtp_port'] = 25;
// SMTP username (if required) if you use %u as the username RoundCube // will use the current username for login $rcmail_config['smtp_user'] = '';
// SMTP password (if required) if you use %p as the password RoundCube // will use the current user's password for login $rcmail_config['smtp_pass'] = '';
// SMTP AUTH type (DIGEST-MD5, CRAM-MD5, LOGIN, PLAIN or empty to use // best server supported one) $rcmail_config['smtp_auth_type'] = '';
// SMTP HELO host
// Hostname to give to the remote server for SMTP 'HELO' or 'EHLO' messages
// Leave this blank and you will get the server variable 'server_name' or // localhost if that isn't defined.
$rcmail_config['smtp_helo_host'] = '';
// Log sent messages
$rcmail_config['smtp_log'] = TRUE;
// these cols are shown in the message list // available cols are: subject, from, to, cc, replyto, date, size, encoding $rcmail_config['list_cols'] = array('subject', 'from', 'date', 'size');
// relative path to the skin folder
$rcmail_config['skin_path'] = 'skins/default/';
// includes should be interpreted as PHP files $rcmail_config['skin_include_php'] = FALSE;
// use this folder to store temp files (must be writebale for apache user) $rcmail_config['temp_dir'] = 'temp/';
// use this folder to store log files (must be writebale for apache user) $rcmail_config['log_dir'] = 'logs/';
// session lifetime in minutes
$rcmail_config['session_lifetime'] = 10;
// check client IP in session athorization $rcmail_config['ip_check'] = false;
// Use an additional frequently changing cookie to athenticate user sessions.
// There have been problems reported with this feature.
$rcmail_config['double_auth'] = false;
// this key is used to encrypt the users imap password which is stored // in the session record (and the client cookie if remember password is enabled).
// please provide a string of exactly 24 chars.
$rcmail_config['des_key'] = 'p+meylCzdoE7QhttKYuQGY41';
// the default locale setting
$rcmail_config['locale_string'] = 'en';
// use this format for short date display $rcmail_config['date_short'] = 'D H:i';
// use this format for detailed date/time formatting $rcmail_config['date_long'] = 'd.m.Y H:i';
// use this format for today's date display $rcmail_config['date_today'] = 'H:i';
// add this user-agent to message headers when sending $rcmail_config['useragent'] = 'RoundCube Webmail/0.1';
// use this name to compose page titles
$rcmail_config['product_name'] = 'RoundCube Webmail';
// only list folders within this path
$rcmail_config['imap_root'] = '';
// store draft message is this mailbox
// leave blank if draft messages should not be stored $rcmail_config['drafts_mbox'] = 'Drafts';
// store spam messages in this mailbox
$rcmail_config['junk_mbox'] = 'Junk';
// store sent message is this mailbox
// leave blank if sent messages should not be stored $rcmail_config['sent_mbox'] = 'Sentmail';
// move messages to this folder when deleting them // leave blank if they should be deleted directly $rcmail_config['trash_mbox'] = 'Trash';
// display these folders separately in the mailbox list.
// these folders will also be displayed with localized names $rcmail_config['default_imap_folders'] = array('INBOX', 'Drafts', 'Sentmail', 'Junk', 'Trash');
// automatically create the above listed default folders on login $rcmail_config['create_default_folders'] = FALSE;
// protect the default folders from renames, deletes, and subscription changes $rcmail_config['protect_default_folders'] = TRUE;
// Set TRUE if deleted messages should not be displayed // This will make the application run slower $rcmail_config['skip_deleted'] = FALSE;
// Set true to Mark deleted messages as read as well as deleted // False means that a message's read status is not affected by marking it as deleted $rcmail_config['read_when_deleted'] = TRUE;
// When a Trash folder is not present and a message is deleted, flag // the message for deletion rather than deleting it immediately. Setting this to // false causes deleted messages to be permanantly removed if there is no Trash folder $rcmail_config['flag_for_deletion'] = TRUE;
// Behavior if a received message requests a message delivery notification (read receipt) // 0 = ask the user, 1 = send automatically, 2 = ignore (never send or ask) $rcmail_config['mdn_requests'] = 0;
// Use this charset as fallback for message decoding $rcmail_config['default_charset'] = 'ISO-8859-1';
// Make use of the built-in spell checker. It is based on GoogieSpell.
// Since Google only accepts connections over https your PHP installatation // requires to be compiled with Open SSL support $rcmail_config['enable_spellcheck'] = TRUE;
// For a locally installed Nox Spell Server, please specify the URI to call it.
// Get Nox Spell Server from [url]http://orangoo.com/labs/?page_id=72[/url]
// Leave empty to use the Google spell checking service, what means // that the message content will be sent to Google in order to check spelling $rcmail_config['spellcheck_uri'] = '';
// These languages can be selected for spell checking.
// Configure as a PHP style hash array: array('en'=>'English', 'de'=>'Deutsch'); // Leave empty for default set of Google spell check languages $rcmail_config['spellcheck_languages'] = NULL;
// path to a text file which will be added to each sent message // paths are relative to the RoundCube root folder $rcmail_config['generic_message_footer'] = '';
// add a received header to outgoing mails containing the creators IP and hostname $rcmail_config['http_received_header'] = false;
// this string is used as a delimiter for message headers when sending // leave empty for auto-detection $rcmail_config['mail_header_delimiter'] = NULL;
// session domain: .example.org
$rcmail_config['session_domain'] = '';
// in order to enable public ldap search, create a config array // like the Verisign example below. if you would like to test, // simply uncomment the Verisign example.
/**
* example config for Verisign directory
*
* $rcmail_config['ldap_public']['Verisign'] = array(
* 'name' => 'Verisign.com',
* 'hosts' => array('directory.verisign.com'),
* 'port' => 389,
* 'base_dn' => '',
* 'bind_dn' => '',
* 'bind_pass' => '',
* 'ldap_version' => 3, // using LDAPv3
* 'search_fields' => array('mail', 'cn'), // fields to search in
* 'name_field' => 'cn', // this field represents the contact's name
* 'email_field' => 'mail', // this field represents the contact's
e-mail
* 'surname_field' => 'sn', // this field represents the contact's last
name
* 'firstname_field' => 'gn', // this field represents the contact's first name
* 'scope' => 'sub', // search mode: sub|base|list
* 'filter' => '', // used for basic listing (if not empty)
and will be &'d with search queries. example: status=act
* 'fuzzy_search' => true); // server allows wildcard search
*/
// don't allow these settings to be overriden by the user $rcmail_config['dont_override'] = array();
// list of configuration option names that need to be available in Javascript.
$rcmail_config['javascript_config'] = array('read_when_deleted', 'flag_for_deletion');
// try to load host-specific configuration $rcmail_config['include_host_config'] = false;
// THIS OPTION WILL ALLOW THE INSTALLER TO RUN AND CAN EXPOSE SENSITIVE CONFIG DATA.
// ONLY ENABLE IT IF YOU'RE REALLY SURE WHAT YOU'RE DOING!
$rcmail_config['enable_installer'] = false;
/***** these settings can be overwritten by user's preferences *****/
// show up to X items in list view
$rcmail_config['pagesize'] = 40;
// use this timezone to display date/time $rcmail_config['timezone'] = intval(date('O'))/100 - date('I');
// is daylight saving On?
$rcmail_config['dst_active'] = (bool)date('I');
// prefer displaying HTML messages
$rcmail_config['prefer_html'] = TRUE;
// compose html formatted messages by default $rcmail_config['htmleditor'] = FALSE;
// show pretty dates as standard
$rcmail_config['prettydate'] = TRUE;
// default sort col
$rcmail_config['message_sort_col'] = 'date';
// default sort order
$rcmail_config['message_sort_order'] = 'DESC';
// save compose message every 300 seconds (5min) $rcmail_config['draft_autosave'] = 300;
// default setting if preview pane is enabled $rcmail_config['preview_pane'] = FALSE;
// don't let users set pagesize to more than this value if set $rcmail_config['max_pagesize'] = 200;
// mime magic database
$rcmail_config['mime_magic'] = '/usr/share/misc/magic';