Ist schon ätzend wenn ein Forum vom Software Entwickler keine Fragen beantwortet die sich eigentlich relativ einfach und schnell beantworten lassen sollten? Da ich keine Lust habe noch eine weitere Woche (oder Länger?) auf Lösungen zu warten bin ich bereit 25,00 € an denjenigen bzw. diejenige zu bezahlen der/die mir Antworten zu folgenden Fragen geben kann. Nachdem die Antworten von mir überprüft wurden kommt das Geld entweder per Bankübeweisung oder PayPal, was eben besser gefällt. Hier die Fragen mit Bilder:
Zur Zeit sieht unser Roundcube im offenen Modus so aus:
http://www.drachenbeere.de/roundcube_alt.gif (http://www.drachenbeere.de/roundcube_alt.gif)
Ich möchte aber das es so aussieht ....
http://www.drachenbeere.de/roundcube_neu.gif (http://www.drachenbeere.de/roundcube_neu.gif)
.... was bedeutet das ich nicht nur den Ordner & Dateiname benötige wo sich dies ändern lässt, aber zusätzlich brauche ich die Erklärung bzw. Möglichkeit das gesamte Roundcube Programm zu verkleinern, so das im IE7 Web Browser etwa 250 px. weniger Platz (Breite) eingenommen wird, damit unser schwarzer Hintergrund an den Seiten zu sehen ist. Das dürfte meines Erachtens nach eine simple GLOBALE EINSTELLUNG sein, mit der sich in der gesamten Roundcube Ansicht, angefangen mit der Login Seite, die Breite verringern lässt? Es muss mit IE7 funktionieren da über 90% aller potentiellen Internet (privat) Kunden diesen Browser benutzen und wir Roundcube kommerziell einsetzen wollen! FireFox ist mir schnurzegal da nur etwa 9% unserer Besucher diesen Browser benutzen. Wer's noch nicht weiss .... first Impressions are absolutely Everything .... und diese kommen nun mal von der Mehrzahl der Besucher, und nicht von der Minderheit. Da IE7, Opera, und FireFox alle Browsertabs (Registerkarten) benutzen, haben viele Leute Ihren Browser im Vollbildmodus geöffnet. Darum muß die Breite (bei uns) weg! Für den kommerziellen Bereich ist es sowieso Grundverkehrt Seiten & Dateien unter FireFox zu entwickeln weil dadurch evtl. Kundschaft & potentielle Einnahmen verloren gehen könnten? Bei Übersetzungen wird ja auch nicht die eigene "Wunschsprache" zuerst übersetzt, sondern die die am meisten von Weltweiter Kundschaft gesprochen wird (normalerweise). Leider scheinen viele Webmaster das immer noch nicht zu verstehen.
Nein, ich erwarte nicht das andere die Arbeit machen. Ich brauche lediglich Dateinnamen, Pfade, und jawohl, für die Globale Breitenveränderung den Code, inkl. Erklärung in welcher Datei dieser eingefügt werden muss um zu funktionieren.
Auch scheint es Probleme beim erstellen von zusätzlichen Ordnern zu geben? Hier noch eine Grafik mit neuen Default Ordnern:
http://www.drachenbeere.de/roundcube_ordner.gif (http://www.drachenbeere.de/roundcube_ordner.gif)
main_inc.php & labels.inc sind die beiden einzigen Dateien die ich hierfür finden konnte. Deswegen sind ja auch die zusätzlichen Ordner automatisch erstellt worden. Aber leider hat die Übersetzung für diese Ordner in der labels.inc Datei nicht gegriffen. Dies hier wurde von uns zwischen sent und trash eingefügt:
$labels['friends'] = 'Gespeichert - Freunde';
$labels['family'] = 'Gespeichert - Familie';
$labels['business'] = 'Gespeichert - Geschäftlich';
$labels['others'] = 'Gespeichert - Sonstige';
$labels['important'] = 'WICHTIG - Zu Bearbeiten!';
Funktionieren tun die neuen Ordner ohne weiteres - nur die übersetzten Ordnernnamen wollen sich merwürdigerweise nicht anpassen ... ???
Wenn es also noch eine Dritte Datei gibt wo so etwas übersetzt werden muss dann benötige ich denn Name/Pfad dafür ebenfalls.
Und zu guter letzt benötige ich noch den genauen Pfad zu der Datei oder den Dateien in der sich die tiny_mce Eigenschaften übersetzen lassen da eine echte Übersetzung ja wohl nur eine wörtliche Übersetzung ist wenn alles übersetzt wird, inklusive die Buttontitel der einzelnen Buttons.
Wie gesagt bin ich gerne bereit für eine ausführliche Antwort zu all diesen Fragen zu bezahlen. Da wir aber ein junges Upstart Unternehmen sind fehlt uns leider das Geld um alles von Grundauf entwickeln zu lassen. 25,00 € biete ich für eine Antwort zu all unseren Fragen in diesem Beitrag. Teilantworten benötige ich nicht denn bei mir herrscht Zeitdruck. Ich brauche also eine einzige Antwort mit sämtlichen hier aufgeführten Problemen. Alles andere zählt nicht. Geld wird nur einmal bezahlt, an die erste richtige Antwort mit allen Lösungen zu diesem Beitrag. Vielen Dank.
.
.
.
Für 25$ nehme ich mir nicht mal die Zeit alles zu lesen was Du willst.
Außerdem empfinde ich es als Unsitte in einem englischen Forum in Deutsch zu schreiben (oder vielleicht ist das gar nicht Deine Muttersprache, da Du den Unterschied zwischen 's' und 'ss' - früher 'ß' - nicht kennst).
Einen Rat: Beschwer Dich nicht über Freeware. Die kostet schießlich nichts. Open Source basiert auf einer einfachen Regel:
Benutze es oder lass es sein. Bezahl die Leute anständig, die es für Dich personlisieren sollen (auf Neu-Deutsch: customizing).
Vielleicht bist Du aber doch anständig und deshalb ein paar Tipps - ohne Bezahlung selbstverständlich:
#1- You have to edit skins/default/mail.css - the rest sounds if you have to run RoundCube in an iframe
#2- maybe you have missed to add your special folders to ...
$rcmail_config['default_imap_folders'] = array('INBOX', 'Drafts', 'Sent', 'Junk', 'Trash');
... in main.inc.php
#3- TinyMCE is third party stuff. Please check for appropriate languge files on their site ... RC setup for TinyMCE is located in program/js/editor.js
Finally, I'm a user here and I understand this forum as a "user contributes user" site. I do not see the devs here. You should check http://trac.roundcube.net
-Roland
You know, it's people just like you that give decent forums a bad reputation, by providing completely unfounded criticism about what others have to say. My offer of 25,00 EUR was based on two things ... first, the assumption that all of the needed answers wouldn't take more than 30 minutes or so to provide at which point we're actually talking about an avg. of 50,00 EUR per hour which is clearly ABOVE the paying standard (Sourceforge has professional services for as low as only 15,00 USD per hour), and secondly because I already tried posting a comment in english to which I received zero response. We're in a hurry to get our project finished and that's yet even a third reason for the german comment. Time wasted by you, more time presently wasted by myself, all over next to nothing!
In case you hadn't noticed, Roundcube was designed by german speaking programmers and there are actually numerous german comments in this forum. I figured that perhaps a german comment would make more sense to someone whom I was offering to pay EUROS to, since our project is located in germany anyway. But back to what I said earlier .... it truly is annoying to have people like you come out with nothing better to do than to get on other people's cases. It's that kind of behavior that truly gives forums all around the world bad names because a lot of forums have bonafide questions, yet when you read a thread with 10, 12, or more replies, more often than not over half of them are either plain garbage that solve nothing, or replies with only partial answers that don't solve much more than nothing.
I'll grant you this though ...
Overall your response was more helpful than some responses, but there's no way that you're going to tell me that your response was any more professional, appropriate, or whatever, then my own. Geeeez, dude, get a grip, will 'ya? Do you really have nothing better to do on a beautiful Sunday?
.
.
.
Ich verstehe ein bisschen was Sie sagen. Ich spreche klein Deutsch; werde ich auf English sprechen ;)
There are some developers here. One in particular does participate, but many do troll the forums here to see what the community has to say about the product since the Trac website doesn't entirely allow all of this. Till (one of the main developers) is a member here, not sure when he was last online, but he is here.
If you place your custom folders in the default_imap_folder array:
$rcmail_config['default_imap_folders'] = array('INBOX', 'Drafts', 'Sent', 'Friends', 'Family', 'Business', 'Others', 'Important', 'Junk', 'Trash');
then they should show up in the folder list where you specify them. Please note that if you do that, any other users who log in to that installation of RoundCube will have those folders made for them if they're not already present.
While RoundCube is a global product, could you please provide a translation (as best you can) into english for those that don't speak German natively? While I think I got the gist of your post, I'd rather not have read something completely wrong :)
Check ...
http://www.gratisemail.dk (productive site of a customer --- open a test account)
or
http://www.roland-liebl.de (test server on a dial up --- slow !!!)
I think there is nothing missing than to load it in an iframe, perhaps some css size adjustments and to customize TinyMCE toolbar according to your needs.
If you like to have it, give me your specs regarding the iframe size ...
-Roland
PS: I have to do better things on pretty sunday ... BBQ is going on now!
Quote from: bpat1434;11817Ich verstehe ein bisschen was Sie sagen. Ich spreche klein Deutsch; werde ich auf English sprechen ;)
If you place your custom folders in the default_imap_folder array:
$rcmail_config['default_imap_folders'] = array('INBOX', 'Drafts', 'Sent', 'Friends', 'Family', 'Business', 'Others', 'Important', 'Junk', 'Trash');
then they should show up in the folder list where you specify them. Please note that if you do that, any other users who log in to that installation of RoundCube will have those folders made for them if they're not already present.
While RoundCube is a global product, could you please provide a translation (as best you can) into english for those that don't speak German natively? While I think I got the gist of your post, I'd rather not have read something completely wrong :)
I'd be happy to provide a complete translation once everything is done. :)
The folder creation was not a problem and I've indicated that both in german as well as in the previous english reply. Our problem has to do
strictly with the translations which we've added to the labels.inc from which they do not appear to work? We used two files, the labels.inc for the translation of the added folder names and I believe the main.inc.php (don't remember off-hand) in order to add the new folders for every user. Again, adding the new folders worked like a charm, but the translations didn't.
The main "other problem" has to do with the formatting. Yes, I realize that roundcube is freeware but as with any freeware the developers also need to (should) realize that by making it free even people with limited to no coding skills, or people with very different coding skills, may download this product. And that's really where the root of our problem lies ....
Of course we've looked at over a dozen different files in order to figure out how to globally reformat roundcube by making the login and all subsequent screens no wider then 850 or so px. Problem is first that roundcube has far more css files than any other programm that I've had to deal with in the past, and secondly, I can't find anything (even in the mail.css) which clearly points me in the right direction as far as getting a global screen size of apx. 850 px. width going. It's frustrating because it can't be hard to do .... we just don't know how to get it done, and that one item alone is preventing us from obtaining the look & feel that we need from a first impression. It's pretty clear that all of the .css files were written by people who knew what they were looking at, and not with people in mind who know absolutely nothing whatsoever about the inner mechanics of roundcube. Example, .css headers:
#ul.toolbarmenu li a ....
#messagecountbar ....
#mailcontframe ....
#mailboxlist-container ....
.... are not names that would indicate to me with any degree of certainty what the heck it is that I would be editing. Sure, I could play with dozens of settings and constantly try out a default user to view the changes, but that seems pretty absurd to me. Isn't there just one file with one specific line where the entire width format of roundcube can be adjusted? Thanks to anyone who's displayed interest in this so far.
.
.
Quote from: rosali;11818I think there is nothing missing than to load it in an iframe, perhaps some css size adjustments and to customize TinyMCE toolbar according to your needs.
If you like to have it, give me your specs regarding the iframe size ...
BBQ is going on now!
Hey, good for you! I'd rather be BBQing too ... :rolleyes:
The iframe size would need to be about 850 px and I don't think that tiny_mce would be a problem as far as resizing goes since I already compared the needed size in my image. If I take out a few items everything should fit into the new iframe format nicely. Thanks.
.
.
I replied to your other thread. You can view a demo of a "wrapped" roundcube version here (http://demo.roundcubeforum.net). It's a simple 7 step processes (although one step edits like 12 files ;) ). It's not difficult. You just have to sit with the code for a few minutes. Or use Firefox and Firebug to play a bit. Also, all "containers" have "container" in their name:
#mailboxcontainer
Hope that helps.
I have coded a "wrapped" Version. Check here ... http://www.roundcubeforum.net/showthread.php?t=2469